MCQ Questions Electrical Engineering Series Parallel Circuit

Electrical Engineering Series Parallel Circuit-1

MCQ Questions Electrical Engineering Series Parallel Circuit

Take a look at these MCQ Questions Electrical Engineering Series Parallel Circuit for engineering interview questions and our tips on how to answer them. If you’re applying for an engineering internship, graduate scheme or entry-level job, you’ll face at least one interview as part of an engineering employer’s recruitment process. You may be interviewed by one or more members of the HR team, senior members of the engineering team you’d be joining or a mixture of both. In this section we will study MCQ Questions Electrical Engineering Series Parallel Circuit.
 

As well as questions about your reasons for applying to the role and the employer in question, engineering recruiters will be assessing your potential in the areas that is crucial to any engineering role: technical expertise. Engineers may be asked to perform feats of fantastic technical prowess, but it will be as as part of a Justice League rather than as a solo engineering superhero.

The interviewer is almost as nervous as the candidate in most interviews. You might wonder if you look confident enough, if you will hire the right person, or if you are asking the right engineering interview questions. The last question is arguably the most crucial part to worry about when you’re interviewing candidates.

The best engineering interview questions to ask candidates should be questions that reveal they have the skills required for the job. If you need a problem solver, ask questions about past experiences. If they need to have a specific skill set, ask them directly about their skills. This chapter consisting Electrical engineering MCQ Questions Electrical Engineering Series Parallel Circuit.

There are six major branches of engineering which include Electrical, Mechanical, Civil, Management, Geotechnical, and Chemical with many different subcategories under each main branch of engineering such as Structural or Biomedical engineering.

This article will get into the top engineering interview questions to ask candidates, eight types of interview questions, how to choose the questions you ask, and then will list excellent questions you can choose from. Let’s jump right in.

You can practice interviews using the resources available from our partners. MCQ Questions Electrical Engineering Series Parallel Circuit are given below.

MCQ Questions Electrical Engineering Series Parallel Circuit - Set - 1

0

Multiple Choice Questions Electrical Engineering Series Parallel Circuit - 1

Multiple Choice Questions

Electrical Engineering

Series Parallel Circuit

1 / 10

1. A galvanometer is a meter that measures small amounts of voltage.

2 / 10

2. The current flowing through an unloaded voltage divider is called the:

3 / 10

3. A smaller-value load resistor will cause the output voltage to change more than a larger-value one.

4 / 10

4. A voltage divider consists of two 68 kΩ resistors and a 24 V source. The unknown output voltage is

5 / 10

5. The first goal to accomplish in analyzing a complex series-parallel circuit is to

6 / 10

6. If R1 is in series with parallel connected to R2 and R3, what happens to total current if R2 opens?

7 / 10

7. The positve (+) and negative (-) ends of the battery are called ______

8 / 10

8. With 21 V applied, if R1 = 5 ohms, R2 = 35 ohms, and R3 = 14 ohms, what is the current of R2 if R1 is series connected with parallel circuit R2 and R3?

9 / 10

9. In a series–parallel circuit consisting of R1 and R2 in series and connected in parallel with R3, if R1 opens, then R2‘s voltage will:

10 / 10

10. A device able to supply electrical energy is a ________

Your score is

The average score is 0%

0%

MCQ Questions Electrical Engineering Series Parallel Circuit

MCQ Questions Electrical Engineering Heating And Welding

Multiple Choice Questions for Competitive Exams