MCQ Questions Electrical Engineering RC Circuits

Multiple Choice Questions RC Circuits-1

MCQ Questions Electrical Engineering RC Circuits

Take a look at these MCQ Questions Electrical Engineering RC Circuits for engineering interview questions and our tips on how to answer them. If you’re applying for an engineering internship, graduate scheme or entry-level job, you’ll face at least one interview as part of an engineering employer’s recruitment process. You may be interviewed by one or more members of the HR team, senior members of the engineering team you’d be joining or a mixture of both. In this section we will study MCQ Questions Electrical Engineering RC Circuits
 

As well as questions about your reasons for applying to the role and the employer in question, engineering recruiters will be assessing your potential in the areas that is crucial to any engineering role: technical expertise. Engineers may be asked to perform feats of fantastic technical prowess, but it will be as as part of a Justice League rather than as a solo engineering superhero.

The interviewer is almost as nervous as the candidate in most interviews. You might wonder if you look confident enough, if you will hire the right person, or if you are asking the right engineering interview questions. The last question is arguably the most crucial part to worry about when you’re interviewing candidates.

The best engineering interview questions to ask candidates should be questions that reveal they have the skills required for the job. If you need a problem solver, ask questions about past experiences. If they need to have a specific skill set, ask them directly about their skills. This chapter consisting Electrical engineering MCQ Questions Electrical Engineering RC Circuits

There are six major branches of engineering which include Electrical, Mechanical, Civil, Management, Geotechnical, and Chemical with many different subcategories under each main branch of engineering such as Structural or Biomedical engineering.

This article will get into the top engineering interview questions to ask candidates, eight types of interview questions, how to choose the questions you ask, and then will list excellent questions you can choose from. Let’s jump right in.

You can practice interviews using the resources available from our partners. MCQ Questions Electrical Engineering RC Circuits are given below.

MCQ Questions Electrical Engineering RC Circuits - Set - 1

0

Multiple Choice Questions Electrical Engineering RC Circuits-1

Multiple Choice Questions

Electrical Engineering

RC Circuits

1 / 10

1. In a parallel RC circuit, there is 100 mA through the resistive branch and 100 mA through the capacitive branch. The total rms current is

2 / 10

2. A 470 Ω resistor and a 0.2 µF capacitor are in parallel across a 2.5 kHz ac source. The admittance, Y, in rectangular form, is

3 / 10

3. In a lag network, the output voltage lags the input voltage in phase

4 / 10

4. Power that is measured in volt-amperes is called

5 / 10

5. In the complex plane, the number 14 – j5 is located in the

6 / 10

6. For a certain load, the true power is 150 W and the reactive power is 125 VAR. The apparent power is

7 / 10

7. What is the angular difference between +j4 and –j4?

8 / 10

8. In a 20 Vac series RC circuit, if 20 V is read across the resistor and 40 V is measured across the capacitor, the applied voltage is

9 / 10

9. A 47 Ω resistor and a capacitor with 150 Ω of capacitive reactance are in series across an ac source. The impedance, expressed in rectangular form, is

10 / 10

10. A 6 kHz sinusoidal voltage is applied to a series RC circuit. The frequency of the voltage across the resistor is

Your score is

The average score is 0%

0%

MCQ Questions Electrical Engineering RC Circuits

MCQ Questions Electrical Engineering Inductor

Multiple Choice Questions for Competitive Exams