MCQ Questions Electrical Engineering RLC Circuits and Resonance

RLC Circuits and Resonance-2

MCQ Questions Electrical Engineering RLC Circuits and Resonance

Take a look at these MCQ Questions Electrical Engineering RLC Circuits and Resonance for engineering interview questions and our tips on how to answer them. If you’re applying for an engineering internship, graduate scheme or entry-level job, you’ll face at least one interview as part of an engineering employer’s recruitment process. You may be interviewed by one or more members of the HR team, senior members of the engineering team you’d be joining or a mixture of both. In this section we will study MCQ Questions Electrical Engineering RLC Circuits and Resonance
 

As well as questions about your reasons for applying to the role and the employer in question, engineering recruiters will be assessing your potential in the areas that is crucial to any engineering role: technical expertise. Engineers may be asked to perform feats of fantastic technical prowess, but it will be as as part of a Justice League rather than as a solo engineering superhero.

The interviewer is almost as nervous as the candidate in most interviews. You might wonder if you look confident enough, if you will hire the right person, or if you are asking the right engineering interview questions. The last question is arguably the most crucial part to worry about when you’re interviewing candidates.

The best engineering interview questions to ask candidates should be questions that reveal they have the skills required for the job. If you need a problem solver, ask questions about past experiences. If they need to have a specific skill set, ask them directly about their skills. This chapter consisting Electrical engineering MCQ Questions Electrical Engineering RLC Circuits and Resonance.

There are six major branches of engineering which include Electrical, Mechanical, Civil, Management, Geotechnical, and Chemical with many different subcategories under each main branch of engineering such as Structural or Biomedical engineering.

This article will get into the top engineering interview questions to ask candidates, eight types of interview questions, how to choose the questions you ask, and then will list excellent questions you can choose from. Let’s jump right in.

You can practice interviews using the resources available from our partners. MCQ Questions Electrical Engineering RLC Circuits and Resonance are given below.

MCQ Questions Electrical Engineering RLC Circuits and Resonance - Set - 2

0

Multiple Choice Questions Electrical Engineering RLC Circuits and Resonance-2

Multiple Choice Questions

Electrical Engineering

RLC Circuits and Resonance

1 / 10

1. A 12 Ω resistor, a 40 µF capacitor, and an 8 mH coil are in series across an ac source. The resonant frequency is

2 / 10

2. At series resonance, the inductive reactance and capacitive reactance are never equal.

3 / 10

3. A series resonant circuit is commonly called a tank circuit.

4 / 10

4. A 10 Ω resistor, a 90 mH coil, and a 0.015 µF capacitor are in series across an ac source. The impedance magnitude at 1,200 Hz below fr is

5 / 10

5. The quality factor (Q) is the ratio of true power to apparent power.

6 / 10

6. In a certain series resonant circuit, VC = 125 V, VL = 125 V, and VR = 40 V. The value of the source voltage is

7 / 10

7. In a series RLC circuit that is operating above the resonant frequency, the current

8 / 10

8. A 90 Ω resistor, a coil with 30 Ω of reactance, and a capacitor with 50 Ω of reactance are in series across a 12 V ac source. The current through the resistor is

9 / 10

9. In a series RLC circuit, the current is minimum at resonance

10 / 10

10. A resistor of 3 kΩ, a 0.05 µF capacitor, and a 120 mH coil are in series across a 5 kHz, 20 V ac source. What is the impedance, expressed in polar form?

Your score is

The average score is 0%

0%

MCQ Questions Electrical Engineering RLC Circuits and Resonance

MCQ Questions Electrical Engineering RC Circuits

Multiple Choice Questions for Competitive Exams