MCQ Questions Electrical Engineering OP Amp Circuits

MCQ Questions Electrical Engineering OP Amp Circuits-5

MCQ Questions Electrical Engineering OP Amp Circuits

Take a look at these MCQ Questions Electrical Engineering OP Amp Circuits for engineering interview questions and our tips on how to answer them. If you’re applying for an engineering internship, graduate scheme or entry-level job, you’ll face at least one interview as part of an engineering employer’s recruitment process. You may be interviewed by one or more members of the HR team, senior members of the engineering team you’d be joining or a mixture of both. In this section we will study MCQ Questions Electrical Engineering OP Amp Circuits. 

As well as questions about your reasons for applying to the role and the employer in question, engineering recruiters will be assessing your potential in the areas that is crucial to any engineering role: technical expertise. Engineers may be asked to perform feats of fantastic technical prowess, but it will be as as part of a Justice League rather than as a solo engineering superhero.

The interviewer is almost as nervous as the candidate in most interviews. You might wonder if you look confident enough, if you will hire the right person, or if you are asking the right engineering interview questions. The last question is arguably the most crucial part to worry about when you’re interviewing candidates.

The best engineering interview questions to ask candidates should be questions that reveal they have the skills required for the job. If you need a problem solver, ask questions about past experiences. If they need to have a specific skill set, ask them directly about their skills. This chapter consisting Electrical engineering MCQ Questions Electrical Engineering OP Amp Circuits.

There are six major branches of engineering which include Electrical, Mechanical, Civil, Management, Geotechnical, and Chemical with many different subcategories under each main branch of engineering such as Structural or Biomedical engineering.

This article will get into the top engineering interview questions to ask candidates, eight types of interview questions, how to choose the questions you ask, and then will list excellent questions you can choose from. Let’s jump right in.

You can practice interviews using the resources available from our partners. MCQ Questions Electrical Engineering OP Amp Circuits are given below.

MCQ Questions Electrical Engineering OP Amp Circuits - Set - 5

0

Multiple Choice Questions Electrical Engineering OP Amp Circuits-5

Multiple Choice Questions

Electrical Engineering

OP Amp Circuits

Slew rate is defined as the max. rate of change of output voltage. Its unit is V/μS.

1 / 10

1. An OPAMP has a slew rate of 5 V/μ S .The largest sine wave O/P voltage possible at a frequency of 1 MHZ is

2 / 10

2. The approximate input impedance of the opamp circuit which has Ri=10k, Rf=100k, RL=10k

3 / 10

3. The output of a particular OP-amp increases 8V in 12µs. The slew rate is

4 / 10

4. The common mode voltage gain of a differential amplifier is equal to RC divided by

5 / 10

5. For an OP-amp with negative feedback, the output is .

6 / 10

6. An amplifier using an opamp with slew rate SR=1v/sec has a gain of 40db.If this amplifier has to faithfully amplify sinusoidal signals from dc to 20KHz without introducing any slew-rate induced distortion, then the input signal level exceed

7 / 10

7. Calculate the cutoff frequency of a first-order low-pass filter for R1 = 2.5kΩ and C1 = 0.05μF

8 / 10

8. When a step-input is given to an OP-amp integrator, the output will be

9 / 10

9. Current cannot flow to ground through .

10 / 10

10. The common mode gain is ___________

Your score is

The average score is 0%

0%

MCQ Questions Electrical Engineering OP Amp Circuits
MCQ Questions Electrical Engineering Circuit Theorems and Conversions

Multiple Choice Questions for Competitive Exams