MCQ Questions Civil Engineering Irrigation, Water Resources Engineering And Hydrology

Take a look at these MCQ Questions Civil Engineering Irrigation, Water Resources Engineering And Hydrology interview questions and our tips on how to answer them. If you’re applying for an engineering internship, graduate scheme or entry-level job, you’ll face at least one interview as part of an engineering employer’s recruitment process. You may be interviewed by one or more members of the HR team, senior members of the engineering team you’d be joining or a mixture of both. In this section we will study MCQ Questions Civil Engineering Irrigation, Water Resources Engineering And Hydrology.

As well as questions about your reasons for applying to the role and the employer in question, engineering recruiters will be assessing your potential in the areas that is crucial to any engineering role: technical expertise. Engineers may be asked to perform feats of fantastic technical prowess, but it will be as as part of a Justice League rather than as a solo engineering super hero.

The interviewer is almost as nervous as the candidate in most interviews. You might wonder if you look confident enough, if you will hire the right person, or if you are asking the right engineering interview questions. The last question is arguably the most crucial part to worry about when you’re interviewing candidates. Other topics on Civil Engineering Multiple Choice Questions can be accessed

MCQ Questions Civil Engineering Irrigation, Water Resources Engineering And Hydrology - Set - 4

Question 1:

Dimensions of coefficient of transmissibility are
a) M°L°T°
b) rvfL’T”1
c) M° L2 T1
d) M°L°V

Check Answer

Correct Answer – (C)

Question 2 :

S-hydrograph is used to obtain unit hydrograph of
a) shorter duration from longer duration
b) longer duration from shorter duration
c) both (a) and (b)
d) none of the above

Check Answer

Correct Answer – (C)

Question 3 :

The unit hydrograph due to a storm may be obtained by dividing the ordinates of the direct runoff hydrograph by
a) direct runoff volume
b) period of storm
c) total rainfall
d) none of the above

Check Answer

Correct Answer – (A)

Question 4 :

The normal annual precipitation at stations X, A, B and C are 700 mm, 1000 mm, 900 mm and 800 mm respectively. If the storm precipitation at three station A, B and C were 100 mm, 90 mm and 80 mm respectively, then the storm precipitation for station X will be
a) 70mm
b) 80mm
c) 90 mm
d) 105 mm

Check Answer

Correct Answer – (A)

Question 5 :

If it rains between 2 P.M. and 3 P.M. and the entire basin area just starts contributing water at 3 P.M. to the outlet, then time of concentration will be
a) 15 minutes
b) 20 minutes
c) 30 minutes
d) 60 minutes

Check Answer

Correct Answer – (D)

MCQ Questions Civil Engineering Irrigation, Water Resources Engineering And Hydrology

Question 6:

The relation between probability (P) and recurrence interval (T) is given by
a) PT = 1
b) PT2 = 1
c) P/T = 1
d) P/T2 = 1

Check Answer

Correct Answer – (A)

Question 7:

The unit hydrograph of a specified duration can be used to evaluate the hydrograph of storms of
a) same duration only
b) same and shorter duration
c) same and longer duration
d) any duration

Check Answer

Correct Answer – (D)

Question 8:

The best unit duration of storm for a unit hydrograph is
a) 1 hour
b) one-fourth of basin lag
c) one-half of basin lag
d) equal to basin lag

Check Answer

Correct Answer – (B)

Question 9:

The rainfall on five successive days were measured as 100 mm, 80 mm, 60 mm, 40 mm and 20 mm respectively. If the infiltration index or the storm loss rate for the catchment area is earlier estimated as 50 mm/day, the total surface run off will be
a) 50 mm
b) 60 mm
c) 90 mm
d) 140 mm

Check Answer

Correct Answer – (C)

Question 10:

A current meter is used to measure the
a) velocity of flow of water
b) depth of flow of water
c) discharge
d) none of the above

Check Answer

Correct Answer – (A)

MCQ Questions Civil Engineering Irrigation, Water Resources Engineering And Hydrology

NCERT Solutions & Download NCERT Textbooks

MCQ Questions Civil Engineering Surveying

Multiple Choice Questions for Competitive Exams

Multiple Choice Questions Class 12 Chemistry The Solid State

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Solutions With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Electrochemistry With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Chemical Kinetics With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Surface Chemistry With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 General Principles and Processes of Isolation of Elements With Answers

Set -1 Set -2 Set -3 Set -4 Set -5