MCQ Questions Civil Engineering Structural Analysis

Take a look at these MCQ Questions Civil Engineering Structural Analysis interview questions and our tips on how to answer them. If you’re applying for an engineering internship, graduate scheme or entry-level job, you’ll face at least one interview as part of an engineering employer’s recruitment process. You may be interviewed by one or more members of the HR team, senior members of the engineering team you’d be joining or a mixture of both. In this section we will study MCQ Questions Civil Engineering Structural Analysis.

As well as questions about your reasons for applying to the role and the employer in question, engineering recruiters will be assessing your potential in the areas that is crucial to any engineering role: technical expertise. Engineers may be asked to perform feats of fantastic technical prowess, but it will be as as part of a Justice League rather than as a solo engineering super hero.

The interviewer is almost as nervous as the candidate in most interviews. You might wonder if you look confident enough, if you will hire the right person, or if you are asking the right engineering interview questions. The last question is arguably the most crucial part to worry about when you’re interviewing candidates. Other topics on Civil Engineering Multiple Choice Questions can be accessed

MCQ Questions Civil Engineering Structural Analysis - Set - 4

Question 1:

For stable structures, one of the important properties of flexibility and stiffness matrices is that the elements on the main diagonal
i) of a stiffness matrix must be positive
ii) of a stiffness matrix must be negative
iii) of a flexibility matrix must be positive
iv) of a flexibility matrix must be nega¬tive
The correct answer is
a) (i) and (iii)
b) (ii) and (iii)
c) (i) and (iv)
d) (ii) and (iv)

Check Answer

Correct Answer – (A)

Question 2 :

Select the correct statement
a) Flexibility matrix is a square symmetrical matrix
b) Stiffness matrix is a square symmetrical matrix
c) both (a) and (b)
d) none of the above

Check Answer

Correct Answer – (C)

Question 3 :

Which of the following is not the displacement method ?
a) Equilibrium method
b) Column analogy method
c) Moment distribution method
d) Kani’s method

Check Answer

Correct Answer – (B)

Question 4 :

When a uniformly distributed load, shorter than the span of the girder, moves from left to right, then the conditions for maximum bending moment at a section is that
a) the head of the load reaches the section
b) the tail of the load reaches the section
c) the load position should be such that the section divides it equally on both sides
d) the load position should be such that the section divides the load in the same ratio as it divides the span

Check Answer

Correct Answer – (D)

Question 5 :

The maximum bending moment due to a train of wheel loads on a simply supported girder
a) always occurs at centre of span
b) always occurs under a wheel load
c) never occurs under a wheel load
d) none of the above

Check Answer

Correct Answer – (B)

MCQ Questions Civil Engineering Structural Analysis

Question 6:

To generate the j th column of the flexibility matrix
a) a unit force is applied at coordinate j and the displacements are calculated at all coordinates
b) a unit displacement is applied at co-ordinate j and the forces are calculated at all coordinates
c) a unit force is applied at coordinate j and the forces are calculated at all coordinates
d) a unit displacement is applied at co-ordinate j and the displacements are calculated at all co-ordinates

Check Answer

Correct Answer – (A)

Question 7:

Study the following statements.
i) The displacement method is more useful when degree of kinematic indeterminacy is greater than the degree of static indeterminacy.
ii) The displacement method is more useful when degree of kinematic indeterminacy is less than the degree of static indeterminacy.
iii) The force method is more useful when degree of static indeterminacy is greater than the degree of kinematic indeterminacy.
iv) The force method is more useful when degree of static indeterminacy is less than the degree of kinematic indeterminacy.
The correct answer is
a) (i) and (iii)
b) (ii) and (iii)
c) (i) and (iv)
d) (ii) and (iv)

Check Answer

Correct Answer – (D)

Question 8:

When a series of wheel loads crosses a simply supported girder, the maximum bending moment under any given wheel load occurs when
a) the centre of gravity of the load system is midway between the centre of span and wheel load under consi-deration
b) the centre of span is midway between the centre of gravity of the load system and the wheel load under consideration
c) the wheel load under consideration is midway between the centre of span and the centre of gravity of the load system
d) none of the above

Check Answer

Correct Answer – (B)

Question 9:

When a uniformly distributed load, longer than the span of the girder, moves from left to right, then the maximum bending moment at mid section of span occurs when the uniformly distributed load occupies
a) less than the left half span
b) whole of left half span
c) more than the left half span
d) whole span

Check Answer

Correct Answer – (D)

Question 10:

A single rolling load of 8 kN rolls along a girder of 15 m span. The absolute maximum bending moment will be
a) 8 kN.m
b) 15 kN.m
c) 30 kN.m
d) 60 kN.m

Check Answer

Correct Answer – (C)

MCQ Questions Civil Engineering Structural Analysis

NCERT Solutions & Download NCERT Textbooks

MCQ Questions Civil Engineering Applied Mechanics and Graphic Statics

Multiple Choice Questions for Competitive Exams

Multiple Choice Questions Class 12 Chemistry The Solid State

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Solutions With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Electrochemistry With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Chemical Kinetics With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Surface Chemistry With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 General Principles and Processes of Isolation of Elements With Answers

Set -1 Set -2 Set -3 Set -4 Set -5