MCQ Questions Civil Engineering RCC Structures Design

Take a look at these MCQ Questions Civil Engineering RCC Structures Design interview questions and our tips on how to answer them. If you’re applying for an engineering internship, graduate scheme or entry-level job, you’ll face at least one interview as part of an engineering employer’s recruitment process. You may be interviewed by one or more members of the HR team, senior members of the engineering team you’d be joining or a mixture of both. In this section we will study MCQ Questions Civil Engineering RCC Structures Design.

As well as questions about your reasons for applying to the role and the employer in question, engineering recruiters will be assessing your potential in the areas that is crucial to any engineering role: technical expertise. Engineers may be asked to perform feats of fantastic technical prowess, but it will be as as part of a Justice League rather than as a solo engineering super hero.

The interviewer is almost as nervous as the candidate in most interviews. You might wonder if you look confident enough, if you will hire the right person, or if you are asking the right engineering interview questions. The last question is arguably the most crucial part to worry about when you’re interviewing candidates. Other topics on Civil Engineering Multiple Choice Questions can be accessed

MCQ Questions Civil Engineering RCC Structures Design - Set - 3

Question 1:

The minimum thickness of the cover at the end of a reinforcing bar should not be less than twice the diameter of the bar subject to a minimum of

A. 10 mm

B. 15 mm

C. 20 mm

D. 25 mm

Check Answer

Correct Answer – (D)

Question 2:

Top bars are extended to the projecting parts of the combined footing of two columns Ldistance apart for a distance of

A. 0.1 L from the outer edge of column

B. 0.1 L from the centre edge of column

C. Half the distance of projection

D. One -fourth the distance of projection

Check Answer

Correct Answer – (B)

Question 3:

For M 150 grade concrete (1:2:4) the moment of resistance factor is

A. 0.87

B. 8.50

C. 7.50

D. 5.80

Check Answer

Correct Answer – (B)

Question 4:

If C is creep coefficient, f is original pre-stress in concrete, m is modular ratio, E is Young’s modulus of steel and e is shrinkage strain, the combined effect of creep and shrinkage is:

A. (1 – C) mf – eE

B. (C – 1)mf + eE

C. (C – 1)mf – eE

D. (1 – C)mf + eE

Check Answer

Correct Answer – (B)

Question 5:

In a pre-stressed member it is advisable to use

A. Low strength concrete only

B. High strength concrete only

C. Low strength concrete but high tensile steel

D. High strength concrete and high tensile steel

Check Answer

Correct Answer – (D)

MCQ Questions Civil Engineering RCC Structures Design

Question 6:

To ensure uniform pressure distribution, the thickness of the foundation, is

A. Kept uniform throughout

B. Increased gradually towards the edge

C. Decreased gradually towards the edge

D. Kept zero at the edge

Check Answer

Correct Answer – (C)

Question 7:

Longitudinal bars and lateral stirrups, is

A. Stress in concrete × area of concrete

B. Stress in steel × area of steel

C. Stress in concrete × area of concrete + Stress in steel × area of steel

D. None of these

Check Answer

Correct Answer – (C)

Question 8:

The maximum permissible size of aggregates to be used in casting the ribs of a slab, is

A. 5 mm

B. 7.5 mm

C. 10 mm

D. 15 mm

Check Answer

Correct Answer – (C)

Question 9:

Pick up the incorrect statement from the following: Tensile reinforcement bars of a rectangular beam

A. Are curtailed if not required to resist the bending moment

B. Are bent up at suitable places to serve as shear reinforcement

C. Are bent down at suitable places to serve as shear reinforcement

D. Are maintained at bottom to provide at least local bond stress

Check Answer

Correct Answer – (C)

Question 10:

Steel bars are generally connected together to get greater length than the standard length by providing

A. Straight bar splice

B. Hooked splice

C. Dowel splice

D. All the above

Check Answer

Correct Answer – (D)

MCQ Questions Civil Engineering RCC Structures Design

NCERT Solutions & Download NCERT Textbooks

MCQ Questions Civil Engineering Waste Water Engineering

Multiple Choice Questions for Competitive Exams

Multiple Choice Questions Class 12 Chemistry The Solid State

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Solutions With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Electrochemistry With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Chemical Kinetics With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Surface Chemistry With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 General Principles and Processes of Isolation of Elements With Answers

Set -1 Set -2 Set -3 Set -4 Set -5