MCQ Questions Electrical Engineering Alternating Current and Voltage

MCQ Questions Electrical Engineering Neural Control and Coordination-5

MCQ Questions Electrical Engineering Branch, Loop and Node Analyses

Take a look at these MCQ Questions Electrical Engineering Alternating Current and Voltage for engineering interview questions and our tips on how to answer them. If you’re applying for an engineering internship, graduate scheme or entry-level job, you’ll face at least one interview as part of an engineering employer’s recruitment process. You may be interviewed by one or more members of the HR team, senior members of the engineering team you’d be joining or a mixture of both. In this section we will study MCQ Questions Electrical Engineering Alternating Current and Voltage
 

As well as questions about your reasons for applying to the role and the employer in question, engineering recruiters will be assessing your potential in the areas that is crucial to any engineering role: technical expertise. Engineers may be asked to perform feats of fantastic technical prowess, but it will be as as part of a Justice League rather than as a solo engineering superhero.

The interviewer is almost as nervous as the candidate in most interviews. You might wonder if you look confident enough, if you will hire the right person, or if you are asking the right engineering interview questions. The last question is arguably the most crucial part to worry about when you’re interviewing candidates.

The best engineering interview questions to ask candidates should be questions that reveal they have the skills required for the job. If you need a problem solver, ask questions about past experiences. If they need to have a specific skill set, ask them directly about their skills. This chapter consisting Electrical engineering MCQ Questions Electrical Engineering Alternating Current and Voltage.

There are six major branches of engineering which include Electrical, Mechanical, Civil, Management, Geotechnical, and Chemical with many different subcategories under each main branch of engineering such as Structural or Biomedical engineering.

This article will get into the top engineering interview questions to ask candidates, eight types of interview questions, how to choose the questions you ask, and then will list excellent questions you can choose from. Let’s jump right in.

You can practice interviews using the resources available from our partners. MCQ Questions Electrical Engineering Alternating Current and Voltage are given below.

MCQ Questions Electrical Engineering Alternating Current and Voltage - Set - 5

0

Multiple Choice Questions Electrical Engineering Alternating Current and Voltage-5

Multiple Choice Questions

Electrical Engineering

Alternating Current and Voltage

1 / 10

1. A waveform has a baseline of 3 V, a duty cycle of 20%, and an amplitude of 8 V. The average voltage value is

2 / 10

2. A sinusoidal current has an rms value of 14 mA. The peak-to-peak value is

3 / 10

3. A sine wave with a period of 4 ms is changing at a faster rate than a sine wave with a period of

4 / 10

4. Two series resistors are connected to an ac source. If there are 7.5 V rms across one resistor and 4.2 V rms across the other, the peak source voltage is

5 / 10

5. Two series resistors are connected to an ac source. If there are 7.5 V rms across one resistor and 4.2 V rms across the other, the peak source voltage is

6 / 10

6. If the peak of a sine wave is 13 V, the peak-to-peak value is

7 / 10

7. The conductive loop on the rotor of a simple two-pole, single-phase generator rotates at a rate of 400 rps. The frequency of the induced output voltage is

8 / 10

8. The instantaneous value is the voltage or current value of a waveform at its peak.

9 / 10

9. A signal with a 400 µs period has a frequency of

10 / 10

10. A 1 kHz signal has a period of 1 ms.

Your score is

The average score is 0%

0%

MCQ Questions Electrical Engineering Alternating Current and Voltage

MCQ Questions Electrical Engineering Branch, Loop and Node Analyses

Multiple Choice Questions for Competitive Exams