MCQ Questions Civil Engineering Applied Mechanics and Graphic Statics

Take a look at these MCQ Questions Civil Engineering Applied Mechanics and Graphic Statics interview questions and our tips on how to answer them. If you’re applying for an engineering internship, graduate scheme or entry-level job, you’ll face at least one interview as part of an engineering employer’s recruitment process. You may be interviewed by one or more members of the HR team, senior members of the engineering team you’d be joining or a mixture of both. In this section we will study MCQ Questions Civil Engineering Applied Mechanics and Graphic Statics.

As well as questions about your reasons for applying to the role and the employer in question, engineering recruiters will be assessing your potential in the areas that is crucial to any engineering role: technical expertise. Engineers may be asked to perform feats of fantastic technical prowess, but it will be as as part of a Justice League rather than as a solo engineering super hero.

The interviewer is almost as nervous as the candidate in most interviews. You might wonder if you look confident enough, if you will hire the right person, or if you are asking the right engineering interview questions. The last question is arguably the most crucial part to worry about when you’re interviewing candidates. Other topics on Civil Engineering Multiple Choice Questions can be accessed

MCQ Questions Civil Engineering Applied Mechanics and Graphic Statics - Set - 5

Question 1:

A stone is thrown vertically upwards with a vertical velocity of 49 m/sec. It returns to the ground in
a) 5 sec
b) 8 sec
c) 10 sec
d) 20 sec

Check Answer

Correct Answer – (C)

Question 2 :

The angle of projection at which the horizontal range and maximum height of a projectile are equal to
a) 36°
b) 45°
c) 56°
d) 76°

Check Answer

Correct Answer – (D)

Question 3 :

Instantaneous center is at infinity when the angular velocity is
a) constant
b) zero
c) maximum
d) minimum

Check Answer

Correct Answer – (B)

Question 4 :

Select the correct statement
a) The body centrode rolls on the space centrode.
b) The space centrode rolls on the body centrode.
c) Both body and space centrodes may role on each other.
d) The body centrode never touches space centrode.

Check Answer

Correct Answer – (A)

Question 5 :

A disc of mass 4 kg, radius 0.5m and moment of inertia 3 kg-m2 rolls on a horizontal surface so that its center moves with speed 5 m/see. Kinetic energy of the disc is
a) 50 J
b) 150 J
c) 200 J
d) 400 J

Check Answer

Correct Answer – (C)

MCQ Questions Civil Engineering Applied Mechanics and Graphic Statics

Question 6:

The maximum value of the horizontal range for a projectile projected with a velocity of 98 m/sec is
a) 98 m
b) 490 m
c) 980 m
d) 1960 m

Check Answer

Correct Answer – (C)

Question 7:

A 2 m long ladder rests against a wall and makes an angle of 30° with the horizontal floor. Where will be the instantaneous center of rotation when the ladder starts slipping ?
i) 1.0 in from the wall
ii) 1.732 m from the wall
iii) 1.0 m above the floor
iv) 1.732 m above the floor The correct answer is
a) (i) and (iii)
b) (i) and (iv)
c) (ii) and (iii)
d) (ii) and (iv)

Check Answer

Correct Answer – (D)

Question 8:

At the instantaneous center, the velocity of the moving lamina at any instant is
a) zero
b) maximum
c) minimum
d) varying

Check Answer

Correct Answer – (A)

Question 9:

When a circular wheel rolls on a straight track, then the shape of body centrode and space centrode respectively are
a) straight line and parabola
b) straight line and circle
c) circle and straight line
d) circle and parabola

Check Answer

Correct Answer – (C)

Question 10:

A flywheel of moment of inertia 20 kg-m” is acted upon by a tangential force of 5 N at 2 m from its axis, for 3 seconds. The increase in angular velocity in radian persecond is
a) 1/2
b) 3/2 ‘
c) 2
d) 3

Check Answer

Correct Answer – (B)

MCQ Questions Civil Engineering Applied Mechanics and Graphic Statics

NCERT Solutions & Download NCERT Textbooks

MCQ Questions Civil Engineering Strength of Materials

Multiple Choice Questions for Competitive Exams

Multiple Choice Questions Class 12 Chemistry The Solid State

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Solutions With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Electrochemistry With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Chemical Kinetics With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Surface Chemistry With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 General Principles and Processes of Isolation of Elements With Answers

Set -1 Set -2 Set -3 Set -4 Set -5