MCQ Questions Civil Engineering Airport Engineering

Take a look at these MCQ Questions Civil Engineering Airport Engineering interview questions and our tips on how to answer them. If you’re applying for an engineering internship, graduate scheme or entry-level job, you’ll face at least one interview as part of an engineering employer’s recruitment process. You may be interviewed by one or more members of the HR team, senior members of the engineering team you’d be joining or a mixture of both. In this section we will study MCQ Questions Civil Engineering Airport Engineering.

As well as questions about your reasons for applying to the role and the employer in question, engineering recruiters will be assessing your potential in the areas that is crucial to any engineering role: technical expertise. Engineers may be asked to perform feats of fantastic technical prowess, but it will be as as part of a Justice League rather than as a solo engineering super hero.

The interviewer is almost as nervous as the candidate in most interviews. You might wonder if you look confident enough, if you will hire the right person, or if you are asking the right engineering interview questions. The last question is arguably the most crucial part to worry about when you’re interviewing candidates. Other topics on Civil Engineering Multiple Choice Questions can be accessed

MCQ Questions Civil Engineering Airport Engineering - Set -

Question 1:

Consider the following statements regarding iCAO recommendation for correction to basic runway length
1. The basic runway length should be increased at the rate of 7 percent per 300 m rise in elevation above the mean sea level.
2. The basic runway length after having been corrected for elevation should be further increased at the rate of 1 percent for every 1°C rise in airport reference temperature above the standard atmospheric temperature at that elevation.
3. The runway length after having been corrected for elevation and temperature should be further increased at the rate of 20% for every 1 percent of effective gradient. Select correct statement of these statements
a) 1 and 2 are correct
b) 2 and 3 are correct
c) 1 and 3 are correct
d) 1,2 and 3 are correct

Check Answer

Correct Answer – (A)

Question 2 :

The minimum width of clearway is
a) 50 m
b) 100 m
c) 150 m
d) 250 m

Check Answer

Correct Answer – (C)

Question 3 :

The capacity of parallel runway pattern depends upon
a) weather conditions and navigational aids available
b) lateral spacing between two runways and weather conditions
c) lateral spacing between two runways and navigational aids available
d) lateral spacing between two runways, weather conditions and navigational aids available

Check Answer

Correct Answer – (D)

Question 4 :

4Assertion A : The ratio of arriving and departing aircrafts influences the airport
capacity: Reason R :Landing operation is generally given priority over the taking off operation.
Select your answer based on the coding system given below:
a) Both A and R are true and R is the correct explanation of A
b) Both A and R are true and R is not the correct explanation of A
c) A is true but R is false.
d) A is false but R is true.

Check Answer

Correct Answer – (A)

Question 5 :

As per ICAO, for A, B, and C type of airports, maximum effective, transverse and longitudinal grades in percentage respectively are
a) 1.0, 1.5 and 1.5
b) 1.0, 1.5 and 2.0
c) 1.5, 1.5 and 2.0
d) 2.0, 2.0 and 2.0

Check Answer

Correct Answer – (A)

MCQ Questions Civil Engineering Airport Engineering

Question 6:

If the monthly mean of average daily temperature for the hottest month of the year is 25° C and the monthly mean of the maximum daily temperature of the same month of the year is 46° C, the airport reference temperature is
a) 32°C
b) 35.5°C
c) 48°C
d) 25°C

Check Answer

Correct Answer – (C)

Question 7:

The engine failure case for determining the basic runway length may require
a) only clearway
b) only stop way ,
c) either a clearway or a stopway
d) either a clearway or a stopway or both

Check Answer

Correct Answer – (D)

Question 8:

An airport has 4 gates. If the weighted average gate occupancy time is 30 minutes and gate utilisation factor is 0.5, then the capacity of the gate will be
a) 1 aircraft per hour
b) 2 aircrafts per hour
c) 4 aircrafts per hour
d) 16 aircrafts per hour

Check Answer

Correct Answer – (C)

Question 9:

As per ICAO recommendation, the rate of change of longitudinal gradient per 30 m length of vertical curve for A and B type of airports is limited to a maximum of
a) 0.1 %
b) 0.2%
c) 0.3 %
d) 0.4%

Check Answer

Correct Answer – (A)

Question 10:

As per ICAO recommendation, minimum width of safety area for instrumental runway should be
a) 78 m
b) 150 m
c) 300 m
d) 450 m

Check Answer

Correct Answer – (C)

MCQ Questions Civil Engineering Airport Engineering

NCERT Solutions & Download NCERT Textbooks

MCQ Questions Civil Engineering Concrete Technology and Design of Concrete Structures

Multiple Choice Questions for Competitive Exams

Multiple Choice Questions Class 12 Chemistry The Solid State

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Solutions With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Electrochemistry With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Chemical Kinetics With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Surface Chemistry With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 General Principles and Processes of Isolation of Elements With Answers

Set -1 Set -2 Set -3 Set -4 Set -5