MCQ Questions Electrical Engineering Network Theorems

MCQ Questions Electrical Engineering Network Theorems

Take a look at these MCQ Questions Electrical Engineering Network Theorems for engineering interview questions and our tips on how to answer them. If you’re applying for an engineering internship, graduate scheme or entry-level job, you’ll face at least one interview as part of an engineering employer’s recruitment process. You may be interviewed by one or more members of the HR team, senior members of the engineering team you’d be joining or a mixture of both. In this section we will study MCQ Questions Electrical Engineering Network Theorems.
 

As well as questions about your reasons for applying to the role and the employer in question, engineering recruiters will be assessing your potential in the areas that is crucial to any engineering role: technical expertise. Engineers may be asked to perform feats of fantastic technical prowess, but it will be as as part of a Justice League rather than as a solo engineering superhero.

The interviewer is almost as nervous as the candidate in most interviews. You might wonder if you look confident enough, if you will hire the right person, or if you are asking the right engineering interview questions. The last question is arguably the most crucial part to worry about when you’re interviewing candidates.

The best engineering interview questions to ask candidates should be questions that reveal they have the skills required for the job. If you need a problem solver, ask questions about past experiences. If they need to have a specific skill set, ask them directly about their skills. This chapter consisting Electrical engineering MCQ Questions Electrical Engineering Network Theorems

There are six major branches of engineering which include Electrical, Mechanical, Civil, Management, Geotechnical, and Chemical with many different subcategories under each main branch of engineering such as Structural or Biomedical engineering.

This article will get into the top engineering interview questions to ask candidates, eight types of interview questions, how to choose the questions you ask, and then will list excellent questions you can choose from. Let’s jump right in.

You can practice interviews using the resources available from our partners. MCQ Questions Electrical Engineering Network Theorems are given below .

MCQ Questions Electrical Engineering Network Theorems - Set - 1

Question 1: 

To determine the polarity of the voltage drop across a resistor, it is necessary to know
(a) value of current through the resistor
(b) direction of current through the resistor
(c) value of resistor
(d) e.m.fs. in the circuit

Correct Answer – (B)

Question 2 : 

An ideal voltage source should have
(a) large value of e.m.f.
(b) small value of e.m.f.
(c) zero source resistance
(d) infinite source resistance

Correct Answer – (C)

Question 3 : 

The concept on which Superposition theorem is based is
(a) reciprocity
(b) duality
(c) non-linearity
(d) linearity

Correct Answer – (D)

Question 4 : 

Kirchhoffs voltage law is related to
(a) junction currents
(b) battery e.m.fs.
(c) IR drops
(d) both (b) and (c)
(e) none of the above

Correct Answer – (D)

Question 5 : 

According to Kirchhoffs voltage law, the algebraic sum of all IR drops and e.m.fs. in any closed loop of a network is always
(a) negative
(b) positive
(c) determined by battery e.m.fs.
(d) zero

Correct Answer – (D)

MCQ Questions Electrical Engineering Network Theorems

Question 6: 

For a voltage source
(a) terminal voltage is always lower than source e.m.f.
(b) terminal voltage cannot be higher than source e.m.f.
(c) the source e.m.f. and terminal voltage are equal

Correct Answer – (C)

Question 7: 

Thevenin resistance Rth is found
(a) by removing voltage sources along with their internal resistances
(6) by short-circuiting the given two terminals
(c) between any two ‘open’ terminals
(d) between same open terminals as for Etk

Correct Answer – (D)

Question 8: 

Superposition theorem can be applied only to circuits having
(a) resistive elements
(b) passive elements
(c) non-linear elements
(d) linear bilateral elements

Correct Answer – (D)

Question 9: 

Kirchhoffs current law is applicable to only
(a) junction in a network
(b) closed loops in a network
(c) electric circuits
(d) electronic circuits

Correct Answer – (A)

Question 10: 

Kirchhoff s current law states that
(a) net current flow at the junction is positive
(b) Hebraic sum of the currents meeting at the junction is zero
(c) no current can leave the junction without some current entering it.
(d) total sum of currents meeting at the junction is zero

Correct Answer – (B)

MCQ Questions Electrical Engineering Network Theorems

MCQ Questions Electrical Engineering Current Electricity

Multiple Choice Questions for Competitive Exams