MCQ Questions Civil Engineering RCC Structures Design

Take a look at these MCQ Questions Civil Engineering RCC Structures Design interview questions and our tips on how to answer them. If you’re applying for an engineering internship, graduate scheme or entry-level job, you’ll face at least one interview as part of an engineering employer’s recruitment process. You may be interviewed by one or more members of the HR team, senior members of the engineering team you’d be joining or a mixture of both. In this section we will study MCQ Questions Civil Engineering RCC Structures Design.

As well as questions about your reasons for applying to the role and the employer in question, engineering recruiters will be assessing your potential in the areas that is crucial to any engineering role: technical expertise. Engineers may be asked to perform feats of fantastic technical prowess, but it will be as as part of a Justice League rather than as a solo engineering super hero.

The interviewer is almost as nervous as the candidate in most interviews. You might wonder if you look confident enough, if you will hire the right person, or if you are asking the right engineering interview questions. The last question is arguably the most crucial part to worry about when you’re interviewing candidates. Other topics on Civil Engineering Multiple Choice Questions can be accessed

MCQ Questions Civil Engineering RCC Structures Design - Set - 2

Question 1:

The width of the flange of a L-beam, should be less than

A. One- sixth of the effective span

B. Breadth of the rib + four times thickness of the slab

C. Breadth of the rib + half clear distance between ribs

D. Least of the above

Check Answer

Correct Answer – (D)

Question 2:

A pre-stressed concrete member is preferred because

A. Its dimensions are not decided from the diagonal tensile stress

B. Large size of long beams carrying large shear force need not be adopted

C. Removal of cracks in the members due to shrinkage

D. All the above

Check Answer

Correct Answer – (D)

Question 3:

If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will
ordinarily be satisfactory in case of a
A. Simply supported beam
B. Continuous beam
C. Cantilever beam
D. None of these

Check Answer

Correct Answer – (C)

Question 4:

Carrying a uniformly distributed load per metre length is suspended at two A pile of length points, the maximum, B.M. at the centre of the pile or at the points of suspension, is
A. WL/8
B. WL²/24
C. WL²/47
D. WL²/16

Check Answer

Correct Answer – (C)

Question 5:

If is the net upward pressure on a square footing of side for a square column of side , the maximum bending moment is given by

A. B.M = pb (c – a)/4

B. B.M = pb (b – a)²/4

C. B.M = pb (b – a)²/8

D. B.M = pb (b + a)/8

Check Answer

Correct Answer – (C)

MCQ Questions Civil Engineering RCC Structures Design

Question 6:

Lapped splices in tensile reinforcement are generally not used for bars of size larger than

A. 18 mm diameter
B. 24 mm diameter
C. 30 mm diameter
D. 36 mm diameter

Check Answer

Correct Answer – (D)

Question 7:

Minimum spacing between horizontal parallel reinforcement of the same size should not be less than

A. One diameter
B. 2.5 diameters
C. 3 diameters
D. 3.5 diameters

Check Answer

Correct Answer – (A)

Question 8:

For a ribbed slab

A. Clear spacing between ribs shall not be greater than 4.5 cm
B. Width of the rib shall not be less than 7.5 cm
C. Overall depth of the slab shall not exceed four times the breadth of the rib
D. All the above

Check Answer

Correct Answer – (D)

Question 9:

A very comfortable type of stairs is

A. Straight
B. Dog legged
C. Geometrical
D. Open newel

Check Answer

Correct Answer – (D)

Question 10:

Columns may be made of plain concrete if their unsupported lengths do not exceed their least lateral dimension

A. Two times
B. Three times
C. Four times
D. Five times

Check Answer

Correct Answer – (C)

MCQ Questions Civil Engineering RCC Structures Design

NCERT Solutions & Download NCERT Textbooks

MCQ Questions Civil Engineering Waste Water Engineering

Multiple Choice Questions for Competitive Exams

Multiple Choice Questions Class 12 Chemistry The Solid State

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Solutions With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Electrochemistry With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Chemical Kinetics With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Surface Chemistry With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 General Principles and Processes of Isolation of Elements With Answers

Set -1 Set -2 Set -3 Set -4 Set -5