MCQ Questions Civil Engineering Estimating And Costing

Take a look at these MCQ Questions Civil Engineering Estimating And Costing for engineering interview questions and our tips on how to answer them. If you’re applying for an engineering internship, graduate scheme or entry-level job, you’ll face at least one interview as part of an engineering employer’s recruitment process. You may be interviewed by one or more members of the HR team, senior members of the engineering team you’d be joining or a mixture of both. In this section we will study MCQ Questions Civil Engineering Estimating And Costing.

As well as questions about your reasons for applying to the role and the employer in question, engineering recruiters will be assessing your potential in the areas that is crucial to any engineering role: technical expertise. Engineers may be asked to perform feats of fantastic technical prowess, but it will be as as part of a Justice League rather than as a solo engineering superhero.

The interviewer is almost as nervous as the candidate in most interviews. You might wonder if you look confident enough, if you will hire the right person, or if you are asking the right engineering interview questions. The last question is arguably the most crucial part to worry about when you’re interviewing candidates.

The best engineering interview questions to ask candidates should be questions that reveal they have the skills required for the job. If you need a problem solver, ask questions about past experiences. If they need to have a specific skill set, ask them directly about their skills. This chapter consisting Electrical engineering MCQ Questions Civil Engineering Estimating And Costing.

There are six major branches of engineering which include Electrical, Mechanical, Civil, Management, Geotechnical, and Chemical with many different subcategories under each main branch of engineering such as Structural or Biomedical engineering.

This article will get into the top engineering interview questions to ask candidates, eight types of interview questions, how to choose the questions you ask, and then will list excellent questions you can choose from. Let’s jump right in.

You can practice interviews using the resources available from our partners. MCQ Questions Civil Engineering Estimating And Costing are given below.

MCQ Questions Civil Engineering Estimating And Costing - Set - 2

Duration of the Quiz - 600 seconds

Created on June 22, 2022 By

Team_Engineers

Multiple Choice Questions Civil Engineering Estimating And Costing - 2

Multiple Choice Questions

Civil Engineering

Estimating And Costing

1 / 10

1. Pick up the correct statement regarding the centre line method of estimating a building

A. Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the item

B. The centre line is worked out separately for different sections of walls of a building

C. The centre line length is reduced by half the layer of main wall joining the partition wall

D. All the above

2 / 10

2. The cross -sections for a highway is taken at

A. Right angle to the centre line

B. 30 metres apart

C. Intermediate points having abrupt change in gradient

D. All the above

3 / 10

3. According to Indian Standards Institute, the actual size of modular bricks is

A. 23 cm × 11.5 cm × 7.5 cm

B. 25 cm × 13 cm × 7.5 cm

C. 19 cm × 9 cm × 9 cm

D. 20 cm × 10 cm × 10 cm

4 / 10

4. Pick up the correct statement from the following:

A. In order to check up the average depth of excavation, ‘Dead man s’ are left at the mid-widths of borrow pits

B. The earthwork calculation in excavation is made from the difference in levels obtained with a level

C. The earth work in excavation to form the road embankment includes the formation of correct profile and depositing the soil in layers

D. All the above

5 / 10

5. Pick up the incorrect statement from the following:

A. Lead is the average horizontal straight distance between the borrow pit and the place of spreading soil

B. The lead is calculated for each block of the excavated area

C. The unit of lead is 50 m for a distance upto 500 m

D. The unit of lead is 1 km where the lead exceeds 2 km

6 / 10

6. The brick work is not measured in cu m in case of

A. One or more than one brick wal

B. Brick work in arches

C. Reinforced brick work

D. Half brick wall

7 / 10

7. The assumption on which the trapezoidal formula for volumes is based, is

A. The end sections are parallel planes

B. The mid-area of a pyramid is half the average area of the ends

C. The volume of the Prismoidal is over-estimated and hence a Prismoidal correction is applied

D. All the above

8 / 10

8. Referring of given figure, pick up the correct statement from the following:

A. The total length of centre line of four walls is 20 m

B. Length of long wall out-to -out is 6.80 m

C. Length of short walls in-to-in is 3.20 m

D. All the above

9 / 10

9. In the mid-section formula

A. The mean depth is the average of depths of two consecutive sections

B. The area of mid-sections is calculated by using mean depth

C. The volume of the earth work is calculated by multiplying the mid-section area by the distance between the two original sections

D. All of the above

10 / 10

10. Pick up the correct statement from the following:

A. The earth work of cutting in trenches or borrow pits in fairly uniform ground is measured with the help of average depths of the dead men

B. The earth work in trenches or borrow pits in irregular ground is measured by taking the difference in levels before and after completion of work

C. The earth work in trenches or borrow pits, where neither a nor b is feasible, are measured from the fillings after deduction of voids

D. All the above

Your score is

The average score is 50%

MCQ Questions Civil Engineering Estimating And Costing

NCERT Solutions & Download NCERT Textbooks

NCERT Solutions Class 10 First Flight Chapter 1 : A Letter to God

NCERT Solutions Class 10 First Flight Chapter 2 : Nelson Mandela: Long Walk to Freedom

NCERT Solutions Class 10 First Flight Chapter 3 : Two Stories about Flying

NCERT Solutions Class 10 First Flight Chapter 4 : From the Diary of Anne Frank

NCERT Solutions Class 10 First Flight Chapter 5 : The Hundred Dresses – I

NCERT Solutions Class 10 First Flight Chapter 6 : The Hundred Dresses – II

NCERT Solutions Class 10 First Flight Chapter 7 : Glimpses of India

NCERT Solutions Class 10 First Flight Chapter 8 : Mijbil the Otter

NCERT Solutions Class 10 First Flight Chapter 9 : Madam Rides the Bus

NCERT Solutions Class 10 First Flight Chapter 10 : The Sermon at Benares

NCERT Solutions Class 10 First Flight Chapter 11 : The Proposal

NCERT Solutions Class 10 First Flight Poem 1 : Dust of Snow

NCERT Solutions Class 10 First Flight Poem 2 : Fire and Ice

NCERT Solutions Class 10 First Flight Poem 3 : A Tiger in the Zoo

NCERT Solutions Class 10 First Flight Poem 4 : How to Tell Wild Animals

NCERT Solutions Class 10 First Flight Poem 5 : The Ball Poem

NCERT Solutions Class 10 First Flight Poem 6 : Amanda

NCERT Solutions Class 10 First Flight Poem 7 : Animals

NCERT Solutions Class 10 First Flight Poem 8 : The Trees

NCERT Solutions Class 10 First Flight Poem 9 : Fog

NCERT Solutions Class 10 First Flight Poem 10 : The Tale of Custard the Dragon

NCERT Solutions Class 10 First Flight Poem 11 : For Anne Gregory

MCQ Questions Civil Engineering Theory of Structures

Multiple Choice Questions for Competitive Exams

MCQ Questions Class 11 Chemistry Plant Growth And Development with Answers
Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 11 Biology Digestion and Absorption with Answers
Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 11 Chemistry Neural Control and Coordination with Answers
Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 11 Biology Locomotion and Movement with Answers
Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 11 Biology Neural Control and Coordination with Answers
Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 English Lost Spring with Answers
Set -1 Set -2 Set -3