Safety MCQ Questions

Take a look at these Safety MCQ Questions for interview questions and our tips on how to answer them. If you’re applying for an Safety internship, graduate scheme or entry-level job, you’ll face at least one interview as part of a Safety employer’s recruitment process. You may be interviewed by one or more members of the HR team, senior members of the Safety team you’d be joining or a mixture of both. In this section we will study Safety MCQ Questions.

As well as questions about your reasons for applying to the role and the employer in question, engineering recruiters will be assessing your potential in the areas that is crucial to any engineering role: technical expertise. Engineers may be asked to perform feats of fantastic technical prowess, but it will be as as part of a Justice League rather than as a solo engineering superhero.

The interviewer is almost as nervous as the candidate in most interviews. You might wonder if you look confident enough, if you will hire the right person, or if you are asking the right engineering interview questions. The last question is arguably the most crucial part to worry about when you’re interviewing candidates.

The best Safety interview questions to ask candidates should be questions that reveal they have the skills required for the job. If you need a problem solver, ask questions about past experiences. If they need to have a specific skill set, ask them directly about their skills. This chapter consisting Safety MCQ Questions.

This article will get into the top Safety interview questions to ask candidates, eight types of interview questions, how to choose the questions you ask, and then will list excellent questions you can choose from. Let’s jump right in.

You can practice interviews using the resources available from our partners. Safety MCQ Questions are given below.

Safety MCQ Questions - Set - 13

Duration of the Quiz - 600 seconds

Created on July 05, 2022 By

Team_Engineers

Multiple Choice Questions Safety Quiz - 13

Multiple Choice Questions

Safety Quiz

1 / 10

1. You are preparing to troubleshoot a system for an electrical problem. Before you start to troubleshoot the components, you would verify that the...

A. Power supply is energized and the voltage is correct.

B. Wires are all electrically insulated and tight.

C. Connections are mechanically and electrically sound.

D. Contacts on all relays are clean and free to move.

2 / 10

2. Which of the following statements is not correct?

A. Electricity tries to travel to ground.

B. Electricity takes the path of least resistance.

C. Electricity always travels to ground.

D. Electricity travels in a complete circuit.

3 / 10

3. Which one of the following statements is correct, regarding the use of extension cords?

A. Extension cords are not allowed to be used in the workplace.

B. Extension cords can be used on any piece of equipment.

C. Extension cords can only be used for temporary, portable pieces of equipment.

D. Extension cords do not have to be UL listed as long as they are used for only 1 hour.

4 / 10

4. To safely check an electrical component for continuity or resistance, you would turn...

A. On the power and disconnect at least one lead from the meter.

B. Off the power and disconnect at least one lead from the component.

C. On the power and disconnect at least one lead from the component.

D. Off the power and disconnect at least one lead from the meter.

5 / 10

5. After you have disabled a motor disconnect, you lock and tag the panel. After this, you should be sure to keep the only key.

A. With your crew leader.

B. At the shop.

C. With your shop supervisor.

D. With your working person.

6 / 10

6. Which of the following are electrical hazards?

A. Flammable materials near electrical equipment and/or static electricity

B. Overloaded circuits

C. All of them are electrical hazards.

D. Damaged insulation on wires, broken plugs, and overheated appliances

7 / 10

7. What is a Ground Fault Circuit Interrupter?

A. A fast-acting device that is sensitive to very low levels of current flow to ground, designed to sense leaks of current large enough to cause serious personal injury.

B. A device for checking the magnetic field of a piece of equipment.

C. A device used to check electrical continuity.

D. A fast-acting device that is designed to protect pieces of electrical equipment

8 / 10

8. What should you do if a portable power tool is damaged, hot, or sparking?

A. Nothing; continue using the tool.

B. Give it to a coworker to use.

C. It's o.k. to use it, as long as it is not used around water.

D. Do not use the equipment and tag it "Out of Service".

9 / 10

9. The main reason electrical injuries occur is:

A. There is no such thing as an electrical injury

B. Electrical systems for the most part are extremely dangerous

C. Procedures are inappropriate, procedures are not followed or ignored, and safety systems are bypassed.

D. Because electrical injuries are a way of life and cannot be avoided

10 / 10

10. A single-phase condition in a three-phase motor can be caused by...

A. A burned motor

B. A defective start capacitor

C. A closed circuit.

D. A blown fuse

Your score is

The average score is 17%

Safety MCQ Questions

NCERT Solutions & Download NCERT Textbooks

NCERT Solutions Class 10 First Flight Chapter 1 : A Letter to God

NCERT Solutions Class 10 First Flight Chapter 2 : Nelson Mandela: Long Walk to Freedom

NCERT Solutions Class 10 First Flight Chapter 3 : Two Stories about Flying

NCERT Solutions Class 10 First Flight Chapter 4 : From the Diary of Anne Frank

NCERT Solutions Class 10 First Flight Chapter 5 : The Hundred Dresses – I

NCERT Solutions Class 10 First Flight Chapter 6 : The Hundred Dresses – II

NCERT Solutions Class 10 First Flight Chapter 7 : Glimpses of India

NCERT Solutions Class 10 First Flight Chapter 8 : Mijbil the Otter

NCERT Solutions Class 10 First Flight Chapter 9 : Madam Rides the Bus

NCERT Solutions Class 10 First Flight Chapter 10 : The Sermon at Benares

NCERT Solutions Class 10 First Flight Chapter 11 : The Proposal

NCERT Solutions Class 10 First Flight Poem 1 : Dust of Snow

NCERT Solutions Class 10 First Flight Poem 2 : Fire and Ice

NCERT Solutions Class 10 First Flight Poem 3 : A Tiger in the Zoo

NCERT Solutions Class 10 First Flight Poem 4 : How to Tell Wild Animals

NCERT Solutions Class 10 First Flight Poem 5 : The Ball Poem

NCERT Solutions Class 10 First Flight Poem 6 : Amanda

NCERT Solutions Class 10 First Flight Poem 7 : Animals

NCERT Solutions Class 10 First Flight Poem 8 : The Trees

NCERT Solutions Class 10 First Flight Poem 9 : Fog

NCERT Solutions Class 10 First Flight Poem 10 : The Tale of Custard the Dragon

NCERT Solutions Class 10 First Flight Poem 11 : For Anne Gregory

MCQ Questions Civil Engineering Elements of Remote Sensing

Multiple Choice Questions for Competitive Exams

MCQ Questions Class 11 Chemistry Plant Growth And Development with Answers
Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 11 Biology Digestion and Absorption with Answers
Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 11 Chemistry Neural Control and Coordination with Answers
Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 11 Biology Locomotion and Movement with Answers
Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 11 Biology Neural Control and Coordination with Answers
Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 English Lost Spring with Answers
Set -1 Set -2 Set -3