DC Networks / Electrical / MCQ

Electrical Engineering Network Theorems

- by Team_Engineers

MCQ Questions Electrical Engineering Network Theorems

Take a look at these MCQ Questions Electrical Engineering Network Theorems for engineering interview questions and our tips on how to answer them. If you’re applying for an engineering internship, graduate scheme or entry-level job, you’ll face at least one interview as part of an engineering employer’s recruitment process. You may be interviewed by one or more members of the HR team, senior members of the engineering team you’d be joining or a mixture of both. In this section we will study MCQ Questions Electrical Engineering Network Theorems.
 

As well as questions about your reasons for applying to the role and the employer in question, engineering recruiters will be assessing your potential in the areas that is crucial to any engineering role: technical expertise. Engineers may be asked to perform feats of fantastic technical prowess, but it will be as as part of a Justice League rather than as a solo engineering super hero.

The interviewer is almost as nervous as the candidate in most interviews. You might wonder if you look confident enough, if you will hire the right person, or if you are asking the right engineering interview questions. The last question is arguably the most crucial part to worry about when you’re interviewing candidates.

The best engineering interview questions to ask candidates should be questions that reveal they have the skills required for the job. If you need a problem solver, ask questions about past experiences. If they need to have a specific skill set, ask them directly about their skills. This chapter consisting Electrical engineering MCQ Questions Electrical Engineering Network Theorems. 

There are six major branches of engineering which include Electrical, Mechanical, Civil, Management, Geotechnical, and Chemical with many different subcategories under each main branch of engineering such as Structural or Biomedical engineering.

This article will get into the top engineering interview questions to ask candidates, eight types of interview questions, how to choose the questions you ask, and then will list excellent questions you can choose from. Let’s jump right in.

You can practice interviews using the resources available from our partners. MCQ Questions Electrical Engineering Network Theorems are given below.

MCQ Questions Electrical Engineering Network Theorems - Set - 2

Question 1: 

The resistance LM will be
(a) 6.66 Q
(b) 12 Q
(c) 18Q
(d) 20Q

Correct Answer – (A)

Question 2 : 

Kirchhoff s law is not applicable to circuits with
(a) lumped parameters
(b) passive elements
(c) distributed parameters
(d) non-linear resistances

Correct Answer – (C)

Question 3 : 

“In any network containing more than one sources of e.m.f. the current in any branch is the algebraic sum of a number of individual fictitious currents (the number being equal to the number of sources of e.m.f.), each of which is due to separate action of each source of e.m.f., taken in order, when the remaining sources of e.m.f. are replaced by conductors, the resistances of which are equal to the internal resistances of the respective sources”.
The above statement is associated with
(a) Thevenin’s theorem
(b) Norton’s theorem
(c) Superposition theorem
(d) None of the above

Correct Answer – (C)

Question 4 : 

Which of the following is non-linear circuit parameter ?
(a) Inductance
(b) Condenser
(c) Wire wound resistor
(d) Transistor

Correct Answer – (A)

Question 5 : 

“Any number of current sources in parallel may be replaced by a single current source whose current is the algebraic sum of individual source currents and source resistance is the parallel combination of individual
source resistances”.
The above statement is associated with
(a) Thevenin’s theorem
(b) Millman’s theorem
(c) Maximum power transfer theorem
(d) None of the above

Correct Answer – (B)

MCQ Questions Electrical Engineering Network Theorems

Question 6: 

Kirchhoff s voltage law applies to circuits with
(a) nonlinear elements only
(b) linear elements only
(c) linear, non-linear, active and passive elements
(d) linear, non-linear, active, passive, time varying as wells as time-in-variant elements

Correct Answer – (D)

Question 7: 

Kirchhoff s law is applicable to
(a) passive networks only
(b) a.c. circuits only
(c) d.c. circuits only
(d) both a.c. as well d.c. circuits

Correct Answer – (D)

Question 8: 

A capacitor is generally a
(a) bilateral and active component
(b) active, passive, linear and nonlinear component
(c) linear and bilateral component
(d) non-linear and active component

Correct Answer – (C)

Question 9: 

“In any linear bilateral network, if a source of e.m.f. E in any branch produces a current I in any other branch, then same e.m.f. acting in the second branch would produce the same current / in the first branch”.
The above statement is associated with
(a) compensation theorem
(b) superposition theorem
(c) reciprocity theorem
(d) none of the above

Correct Answer – (C)

Question 10: 

“Maximum power output is obtained from a network when the load resistance is equal to the output resistance of the network as seen from the terminals of the load”. The above statement is associated with
(a) Millman’s theorem
(b) Thevenin’s theorem
(c) Superposition theorem
(d) Maximum power transfer theorem

Correct Answer – (D)

MCQ Questions Electrical Engineering Network Theorems

Set 1
Set 2
Set 3
Set 4
Set 5

NCERT Solutions & Download NCERT Textbooks

MCQ Questions Electrical Engineering Current Electricity

Set 1
Set 2
Set 3
Set 4
Set 5

Multiple Choice Questions for Competitive Exams

Related Posts

MCQ Questions Electrical Engineering Branch, Loop and Node Analyses-7

MCQ Questions Electrical Engineering Branch, Loop and Node Analyses

MCQ Questions Electrical Engineering Branch, Loop and Node Analyses-6

MCQ Questions Electrical Engineering Branch, Loop and Node Analyses

MCQ Questions Electrical Engineering Branch, Loop and Node Analyses-5

MCQ Questions Electrical Engineering Branch, Loop and Node Analyses