Star Delta Transformation and Delta Star Transformation

Star Delta Transformation and Delta Star Transformation

Delta Star Transformation :

In solving networks (having considerable number of branches) by the application of Kirchhoff’s Laws, one sometimes experiences great difficulty due to a large number of simultaneous equations that have to be solved. However, such complicated network can be simplified by successively replacing delta meshes by equivalent star system and vice versa.

Suppose we are given three resistances R12, R23 and R31 connected in delta fashion between terminals 1, 2 and 3 as in Figure (a), given below.

star delta transormation

So far as the respective terminals are concerned, these three given resistances can be replaced by the three resistances R1, R2 and R3 connected in star as shown in Figure (b).

These two arrangements will be electrically equivalent if the resistance as measured between any pair of terminals is the same in both the arrangements. Let us find this condition. 

star delta transormation

First, take delta connection : Between terminals 1 and 2, there are two parallel paths; one having a resistance of R12 and the other having a resistance of (R12 + R31).
∴ Resistance between terminals 1 and 2 is

 

Now, take star connection : The resistance between the same terminals 1 and 2 is (R1 + R2). As terminal resistances have to be the same
∴ http://engg.mcqsduniya.in/wp-content/uploads/2020/12/star-delta-transormation-3.jpg      …………………………….(i)

 

Similarly, for terminals 2 and 3 and terminals 3 and 1, we get

http://engg.mcqsduniya.in/wp-content/uploads/2020/12/star-delta-transormation-3.jpg    …………………………….(ii)

 

And

http://engg.mcqsduniya.in/wp-content/uploads/2020/12/star-delta-transormation-3.jpg  …………………………….(iii)

 

Now, subtracting (ii) from (i) and adding the result to (iii), we get

 

http://engg.mcqsduniya.in/wp-content/uploads/2020/12/star-delta-transormation-3.jpg

 

Resistance of each arm of the star is given by the product of the resistances of the two delta sides that meet at its end divided by the sum of the three delta resistances.

Delta Star Transformation :


This transformation can be easily done by using equations (i), (ii) and (iii) given above. Multiplying (i) and (ii), (ii) and (iii), (iii) and (i) and adding them together and then simplifying them, we get

 

http://engg.mcqsduniya.in/wp-content/uploads/2020/12/star-delta-transormation-3.jpg

 

The equivalent delta resistance between any two terminals is given by the sum of star resistances between those terminals plus the product of these two star resistances divide by the third star resistances.

Read article – Units of Resistivity

Visit NCERTplanet.com for NCERT solutions and Textbook downloads