MCQ Questions Electrical Engineering Time Response of Reactive Circuits

Time Response of Reactive Circuits-4

MCQ Questions Electrical Engineering Time Response of Reactive Circuits

Take a look at these MCQ Questions Electrical Engineering Time Response of Reactive Circuits for engineering interview questions and our tips on how to answer them. If you’re applying for an engineering internship, graduate scheme or entry-level job, you’ll face at least one interview as part of an engineering employer’s recruitment process. You may be interviewed by one or more members of the HR team, senior members of the engineering team you’d be joining or a mixture of both. In this section we will study MCQ Questions Electrical Engineering Time Response of Reactive Circuits
 

As well as questions about your reasons for applying to the role and the employer in question, engineering recruiters will be assessing your potential in the areas that is crucial to any engineering role: technical expertise. Engineers may be asked to perform feats of fantastic technical prowess, but it will be as as part of a Justice League rather than as a solo engineering superhero.

The interviewer is almost as nervous as the candidate in most interviews. You might wonder if you look confident enough, if you will hire the right person, or if you are asking the right engineering interview questions. The last question is arguably the most crucial part to worry about when you’re interviewing candidates.

The best engineering interview questions to ask candidates should be questions that reveal they have the skills required for the job. If you need a problem solver, ask questions about past experiences. If they need to have a specific skill set, ask them directly about their skills. This chapter consisting Electrical engineering MCQ Questions Electrical Engineering Time Response of Reactive Circuits.

There are six major branches of engineering which include Electrical, Mechanical, Civil, Management, Geotechnical, and Chemical with many different subcategories under each main branch of engineering such as Structural or Biomedical engineering.

This article will get into the top engineering interview questions to ask candidates, eight types of interview questions, how to choose the questions you ask, and then will list excellent questions you can choose from. Let’s jump right in.

You can practice interviews using the resources available from our partners. MCQ Questions Electrical Engineering Time Response of Reactive Circuits are given below.

MCQ Questions Electrical Engineering Time Response of Reactive Circuits - Set - 4

0

Multiple Choice Questions Electrical Engineering Time Response of Reactive Circuits-4

Multiple Choice Questions

Electrical Engineering

Time Response of Reactive Circuits

1 / 10

1. Referring to the bellow figure, determine the voltage level that the output will reach during the pulse.

Time Response of Reactive Circuits-02

2 / 10

2. In an RC integrating circuit, the output voltage is taken across the capacitor.

3 / 10

3. A single 6 V pulse with a width of 600 μs is applied to an integrator consisting of a 150 kΩ resistor and a 0.002 μF capacitor. To what voltage will the capacitor charge?

4 / 10

4. In an RC differentiator, the capacitor.

5 / 10

5. With an RL integrator, at the instant of the rising pulse edge,

6 / 10

6. When a 24 V input pulse with a width equal to five time constants is applied to an RC integrator, the capacitor charges to

7 / 10

7. An RC differentiator acts as a

8 / 10

8. When a 15 V input pulse with a width equal to two time constants is applied to an RC integrator, the capacitor charges to

9 / 10

9. An integrator consists of a 3.3 kΩ resistor and a 2 μF capacitor. A single 30 V, 6 ms pulse is applied to the input. How much will the capacitor charge?

10 / 10

10. The rising and falling edges of a pulse waveform contain the higher frequency component.

Your score is

The average score is 0%

0%

MCQ Questions Electrical Engineering Time Response of Reactive Circuits
MCQ Questions Electrical Engineering Three Phase Systems In Power Applications

Multiple Choice Questions for Competitive Exams