MCQ Questions Civil Engineering Highway Engineering

Take a look at these MCQ Questions Civil Engineering Highway Engineering interview questions and our tips on how to answer them. If you’re applying for an engineering internship, graduate scheme or entry-level job, you’ll face at least one interview as part of an engineering employer’s recruitment process. You may be interviewed by one or more members of the HR team, senior members of the engineering team you’d be joining or a mixture of both. In this section we will study MCQ Questions Civil Engineering Highway Engineering.

As well as questions about your reasons for applying to the role and the employer in question, engineering recruiters will be assessing your potential in the areas that is crucial to any engineering role: technical expertise. Engineers may be asked to perform feats of fantastic technical prowess, but it will be as as part of a Justice League rather than as a solo engineering super hero.

The interviewer is almost as nervous as the candidate in most interviews. You might wonder if you look confident enough, if you will hire the right person, or if you are asking the right engineering interview questions. The last question is arguably the most crucial part to worry about when you’re interviewing candidates. Other topics on Civil Engineering Multiple Choice Questions can be accessed

MCQ Questions Civil Engineering Highway Engineering - Set - 3

Question 1:

The transition curve used in the horizontal alignment of highways as per IRC recommendations is
A. spiral
B. lemniscate
C. cubic parabola
D. any of the above

Check Answer

Correct Answer – (A)

Question 2 :

Select the correct statement.
A. Psychological extra widening depends on the number of traffic lanes.
B. Mechanical extra widening depends on the speed of vehicle.
C. Psychological extra widening depends on the length of wheel base.
D. Psychological extra widening depends on the speed of vehicle.

Check Answer

Correct Answer – (D)

Question 3 :

The absolute minimum radius of curve for safe operation for a speed of 110 kmph is
A. 110 m
B. 220 m
C. 440 m
D. 577 m

Check Answer

Correct Answer – (C)

Question 4 :

For a constant value of coefficient of lateral friction, the value of required super-elevation increases with
A. increase in both speed and radius of curve
B. decrease in both speed and radius of curve
C. increase in speed and with decrease in radius of curve
D. decrease in speed and with increase in radius of curve

Check Answer

Correct Answer – (D)

Question 5 :

For the design of super elevation for mixed traffic conditions, the speed is reduced by
A. 15%
B. 20%
C. 25%
D. 75%

Check Answer

Correct Answer – (C)

MCQ Questions Civil Engineering Highway Engineering

Question 6:

In case of hill roads, the extra widening is generally provided
A. equally on inner and outer sides of the curve
B. fully on the inner side of the curve
C. fully on the outer side of the curve
D. one-fourth on inner side and three-fourth on outer side of the curve

Check Answer

Correct Answer – (B)

Question 7:

The attainment of super elevation by rotation of pavement about the inner edge of the pavement
A. is preferable in steep terrain
B. results in balancing the earthwork
C. avoids the drainage problem in flat terrain
D. does not change the vertical alignment of road

Check Answer

Correct Answer – (C)

Question 8:

To calculate the minimum value of ruling radius of horizontal curves in plains, the design speed is given by
A. 8 kmph
B. 12kmph
C. 16kmph
D. 20 kmph

Check Answer

Correct Answer – (C)

Question 9:

On a horizontal curve if the pavement is kept horizontal across the alignment, then the pressure on the outer wheels will be
A. more than the pressure on inner wheels
B. less than the pressure on inner wheels
C. equal to the pressure on inner wheels
D. zero

Check Answer

Correct Answer – (A)

Question 10:

As per IRC recommendations, the maximum limit of super elevation for mixed traffic in plain terrain is
A. 1 in 15
B. 1 in 12.5
C. 1 in 10
D. equal to camber

Check Answer

Correct Answer – (A)

MCQ Questions Civil Engineering Highway Engineering

NCERT Solutions & Download NCERT Textbooks

MCQ Questions Civil Engineering Irrigation, Water Resources Engineering And Hydrology

Multiple Choice Questions for Competitive Exams

Multiple Choice Questions Class 12 Chemistry The Solid State

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Solutions With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Electrochemistry With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Chemical Kinetics With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 Surface Chemistry With Answers

Set -1 Set -2 Set -3 Set -4 Set -5
MCQ Questions Class 12 General Principles and Processes of Isolation of Elements With Answers

Set -1 Set -2 Set -3 Set -4 Set -5